Quick answer. Test the skill directly. Check AWS Certified Welder status in the AWS national registry, then run a short weld test in the process and position the job needs, and inspect or bend the coupon. For other trades, verify licenses and certifications with the issuing body. Pay for any trial shift, and give every candidate the same test.
Some of the best welders you'll ever meet have terrible resumes. They list two jobs, misspell the third and leave out the pipe certifications that actually matter. Some candidates with polished resumes, meanwhile, struggle once they're under the hood.
Writing and welding are different skills, and only one of them builds your project. In the 2026 workforce survey by the Associated General Contractors and NCCER, run in July and August 2026 with 1,830 respondents, 50% said available candidates weren't qualified because they lacked essential skills or the right certification or license. If you're working out how to test a welder before hiring, start with what you can verify, then run a short test matched to the job.
Start with credentials you can check
Before you schedule anything, verify what the candidate says they hold.
- AWS Certified Welder. The American Welding Society keeps a national registry that employers use to verify certification. The certification stays valid as long as the welder files maintenance paperwork every six months showing continued use of the process.
- What the certification covers. Ask which process, position, base metal and thickness range it was tested on. A flat-position plate test says little about overhead pipe work.
- NCCER credentials. NCCER runs an online portal that lets employers verify credentials, and holders can share a secure link or QR code to their records.
- For HVAC hires, EPA 608. The certifying organization keeps the records, and the credential doesn't expire.
Many good welders hold qualification records from an employer or a union rather than AWS Certified Welder status, so ask for those as well. Paperwork shows what someone passed in the past, and a matched test shows how they weld now.
Tell candidates what to expect
A test goes better for both sides when nobody is surprised. When you schedule it, tell the candidate the process and position you'll test, the material and thickness, how long it will take and what you'll pay for the time. Ask them to bring their own hood, gloves and jacket if that's your shop's practice, and say so if you supply them.
Experienced welders sometimes turn down unannounced tests, especially when they're employed and taking time off to attend. Clear details up front keep those candidates in your pipeline, and they let you compare everyone on the same terms.
Run a weld test that matches the job
Design the test around the work you actually need done.
- Pick the process and position. If the job is structural plate in the vertical position, test 3G. If it's pipe, consider 6G, which is fixed at a 45-degree angle and covers every position in one test.
- Supply the setup. Use your own machine, consumables and material, so you're testing the welder rather than their equipment.
- Set a realistic time. Give them the time a good welder would need, plus a few minutes to get familiar with your machine.
- Inspect the coupon. Look at it visually first, for undercut, porosity, inconsistent bead profile and spatter. Many shops then cut the plate into strips and bend them, which shows defects hidden inside the weld. If you don't have a bend jig, a local welding test lab or an AWS Accredited Test Facility can cut and bend the coupon for a fee.
If you have access to an AWS Certified Welding Inspector, have them judge the coupon. CWIs are certified to inspect welds against codes and standards.
If the job is code work
Structural steel, pressure piping and similar work usually falls under a code such as AWS D1.1 or ASME Section IX. Those codes generally make the employer responsible for qualifying its welders to its own welding procedure and keeping the record. In that case, run the hiring test to your procedure, have a CWI or an accredited test lab evaluate it, and the passing test can double as the welder's qualification with your company. Test thickness matters too, because a qualification on thin plate usually doesn't cover heavy sections. Ask your quality manager or inspector which code applies before you design the test.
What to watch during the test
The coupon tells you about skill. The 30 minutes around it tell you about the person.
Watch whether they check the machine settings, prep and fit the joint properly, and clean between passes. Watch their PPE and how they handle hot material. A candidate who asks good questions about the job before striking an arc is often the one who'll ask before making an expensive mistake on yours. Afterward, ask them to talk you through the weld, including what they'd change. Honest self-assessment is a good sign in a new hire.
Pay for the trial
If you bring someone in for a working interview or a trial shift, pay them, ideally at the role's rate. The Fair Labor Standards Act requires covered employees to be paid at least minimum wage for all hours worked, and productive work on a trial day would generally count. A paid trial makes the candidate an employee for the day, so run it through payroll and check that your workers' compensation coverage applies.
Keep testing fair and consistent
Give every candidate for the same role the same test, judge it the same way and write down the result. The Equal Employment Opportunity Commission notes that tests which disproportionately screen out protected groups must be job-related and consistent with business necessity. In my view, a weld test built around the actual job meets that standard far more easily than a generic one. If a candidate asks for a disability accommodation during the test, consider it, as the Americans with Disabilities Act requires.
Beyond welding
The same approach works for every trade. Verify what can be verified, such as a state license through the board's lookup or an HVAC tech's EPA 608 type, then watch the person do a small piece of the real job. Our guide to vetting and interviewing trade workers covers the interview side.
Find welders and tradespeople to test
On Qiggz, employers post jobs free, and workers browse and apply free. Mention in the posting that you run a paid practical test. In my view, skilled candidates often read that as a sign the shop takes quality seriously. For more places to list openings, see our roundup of where to post trade jobs for free.
Frequently asked questions
How do you test a welder before hiring?
Verify their certifications first, including AWS Certified Welder status in the AWS registry. Then have them weld a test coupon in the process and position the job needs, using your equipment. Inspect it visually, and bend or cut it to check for hidden defects. Pay for the time.
How do I verify an AWS welding certification?
The American Welding Society keeps a national registry that employers use to verify Certified Welder status. Certification stays valid when the welder files maintenance paperwork every six months. Ask which process, position and material the test covered.
Can I ask a candidate to work an unpaid trial shift?
It's risky. The Fair Labor Standards Act requires covered employees to be paid at least minimum wage for all hours worked, and productive work during a trial would generally count. Paying for trials avoids the issue and shows candidates respect.
What should a welding test include?
The process, position, material and thickness the job uses, on your machine and consumables, with a realistic time limit. Judge the coupon visually and with a bend or cut test, and give every candidate for the role the same test.
Sources
- Associated General Contractors of America and NCCER, 2026 Workforce Survey Analysis (1,830 respondents, surveyed July and August 2026). https://www.agc.org/sites/default/files/users/user21902/2026%20Workforce%20Survey%20Analysis%20(4).pdf
- American Welding Society, Certified Welder FAQs (national registry, six-month maintenance). https://www.aws.org/certification/CW_FAQs
- American Welding Society, Certified Welding Inspector (CWI). https://www.aws.org/certification/cwi/
- NCCER, Digital Wallet and online credential verification. https://www.nccer.org/workforce-development-programs/credentials-registry/nccer-digital-badging
- U.S. Environmental Protection Agency, Section 608 Technician Certification. https://www.epa.gov/section608/section-608-technician-certification-0
- U.S. Department of Labor, Wage and Hour Division, Minimum wage. https://www.dol.gov/agencies/whd/minimum-wage
- U.S. Equal Employment Opportunity Commission, Employment Tests and Selection Procedures. https://www.eeoc.gov/laws/guidance/employment-tests-and-selection-procedures


