Unit Inspector 2nd shift

1. Check for and obtain required tools, equipment, and parts as needed.

2. Work from blue prints and verbal instructions from Supervisor.

3. Perform a finished product inspection and verify that all products conform to the specification. This is accomplished through a visual inspection of the product. Return products for repair that do not meet the specifications.

4. Perform other operations to resolve assembly problems including basic visual inspection of various parts/components, verifying their conformance to specifications within the span of normal unit flow and timing as instructed by the Supervisor.

5. Perform a variety of packaging operations necessary to pack units/parts for shipment. Enclose with required tags, instructions, warranties, etc., and seal with packaging tools.

6. Perform simple repair and/or rework to piece-parts and units such as changing wires, minor straightening or aligning of sheet metal, minor touch-up of surface deformations and finish defects, drilling or reaming of holes, combing damaged fins in coils, and similar repair duties performed within the span of normal unit flow and timing as instructed by Supervisor.

7. Communicate repetitive quality issues to the Supervisor, Production Team Lead, or Group Lead as necessary.

8. Apply identification labels to finished units, piece-parts, cartons or crates to properly identify our product. Verifies that the correct Data Label and Carton Label are placed on the unit.

9. Perform basic housekeeping functions of sweeping, straightening, etc., to assure a work area of a neat/orderly/clean/productive atmosphere.

10. Perform any and all other department duties as assigned by Supervisor.

11. Achieve and maintain 5S standards.

To perform this job successfully, individual must be able to perform each essential duty satisfactorily.

1. High school diploma or equivalent.

2. Ability to read and interpret blueprints.

3. Use of decimals, fractions and scales.

4. Ability to use pneumatic tools safely and correctly.

5. On job training.

6. Communicate Effectively

7. Computer skills ability to read and use (Key Component verifcation, IPCS, OMS, BOM)

The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Very repetitive work, continuous standing, pushing, pulling, lifting, and carry of heavy and/or bulk part required. Weight amounts may vary from 5 pounds to 50 pounds, any amount over 50 pounds requires physical or mechanical help. Arm strength and coordination required for use of pneumatic tools. Repetitive motion of hands, wrists, elbows, and shoulders. Ability to raise arms above chest level and overhead. Rotating of upper body to lift and position parts on units or conveyor line. Continuous visual and some close mental attention to details involved in assembling unit to blueprint specifications.

Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization is not available.

Equal Opportunity Employer, including disability / veterans

*Bosch adheres to Federal, State, and Local laws regarding drug-testing. Employment is contingent upon the successful completion of a drug screen and background check. Candidates who have been offered the position must pass both screenings before their start date.