Machine Operator: Belt & Pack Specialist III (PA4) Making 1st shift

Must be flexible and able to adapt quickly

General Math skills

Ability to multitask You must be able to stand for a minimum of 8 hours a day and also have excellent use of your hands.

Ability to read and follow instructions

Ability to lift (up to) 40lb. boxes

High School Diploma or GED from an accredited school required

Prefer experience in machine operations

Additional information

Setting up and operating all components of the machine successfully. Replenishing materials as needed (tape, die-cut folders, glue, slit rolls, ant-theft sensotags). Placing packaged belts into cartons / Loading raw materials into the machine. Loading / Unloading pallets. Operate pin lift and pallet lift. Making the necessary adjustments to run machine efficiently. Reading and following standard operating procedures pertaining to the machine. Detect and determine the appropriate quality standards and measures for each stage of the process. Understanding and following procedures pertaining to machine cleanliness and tool organization. Being willing to operate a variety of machines on an as needed basis. Maintaining knowledge of safety procedures associated with each machine, including but not limited to: Safety guards, emergency stops, and use of green locks

All your information will be kept confidential according to EEO guidelines.

Load material on machine as needed

Operate pin lift, pallet lift, and hoist

Set up and start up of the machine and operate successfully

Make successful adjustments to machine as needed

Assist in the troubleshooting of machine issues and assist with repairs according to escalation plan

Reading and following standard operating procedures pertaining to the machine being operated

Follow the appropriate quality standards and measures for the machine being operated

Understand and following procedures pertaining to machine cleanliness and tool organization

Maintaining knowledge of all safety procedures associated with the machine being operated

Machine has a feeding system by clamp beam working on idle conveyor, the system is motorized. The feeding clamp beams are placed one before and one after cutting head.

Touch screen parameters provide the possibility to set material width in between the cuts (trim), to have the minimum waste as possible. A recipe menu provide the possibility to save machine setup data for each combination: shape size, master web width, material type, etc. The operator has only to recall the desired recipe to start a new machine setup.