External Job · via Smartrecruiters

KanBan Operator

SeniorPlc1Oceanside, CA

💰 $17 – $18/hrFull-time

Quick Summary

KanBan Operator processing and cutting metal tubes and parts using saws and finishing machines on an AM shift.

Skills & Keywords

band saw operationtube deburringmachine operationmaterial cutting

As a KanBan Operator you will

Processing parts through the Kanban production area including cutting of material to specific lengths using horizontal band saws and chop saws as well as facing and deburring of tubes.

What will my responsibilities include?

Cutting material to length with horizontal/chop saws based off start dates on the daily cut list. Responsible for setting the length using the saw length guide and cut the amount of tubes needed for the job as specified on the job traveler.
Facing of tube ends using 2CP/3CP end finish machines. This includes picking up the tube, placing it in the dies located inside the jaws of the machine, closing the jaws around the tube and cycling the facing arbor to square the end of the tube
Deburring of tube ends using deburr machine that uses an arbor with sharp edges. This includes picking up the tube and positioning the tube inside diameter (ID) on the ID deburr tool and then on outside diameter (OD) deburr tool within the machine
Trimming straight tubes to customer required length using calipers to measure for accuracy
Logging of jobs that are completed in the KPI/ERP systems
Bundle and load jobs to Bend staging racks sorted by job number, material type, quantity and center line radius
Performing equipment preventative maintenance. This includes, but is not limited to, checking of the belts on 2CP/3CP end finish machine for wear, adding lubrication to machines, inspecting and replacing saw blades, if needed
Maintaining 5’s + Safety of department
Meeting goals established in department for productivity
Using required PPE required for the department
Other reasonable duties as business and operational needs dictate